Weathertough Matt Emulsionweathertough_matt_emulsion
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

Weathertough Matt Emulsion

Products->Decorative->Exterior

Weathertough Matt Emulsion

 

Product

A premium quality water-based paint based on 100% pure acrylic emulsion pigmented with rutile titanium dioxide and light / alkali resistant pigments and extenders. The product has excellent scrub resistance and wash ability and having high crack bridge ability up to 0.1 to 1 mm. The biocides content in the product is adequate to resist fungus and algae growth under interior or exterior application condition thus making it suitable for both purposes.

Features
  • Smooth Matt Finish.
  • Easy to apply
  • Low Odor
  • Available in several shades.

Recommended Use

Area of Use               : Exterior & Interior                                                                                                                                                                      Substrate                 : Ideal for concrete, plaster, brick work & block work.

Specification & Other Information

Color

:  As per company Shade Card

Finish

:  Matt 

NVM%

:  38±2

Specific Gravity

:  1.35± 0.02

Thinner/Cleaner

:  Water

Thinning volume

:  10- 30% max
Application Method :  Roller, Brush, Spray (Conventional and airless)
Typical DFT

:  30-40 microns
Theoretical coverage

:  10 - 13 m2/lt
Practical coverage  : Would depend on surface quality, application skill, loss due to handling etc.
Drying time @ 30°C

:  Touch dry – 2 hour
Recoating time

: 2 hours
Hard Dry : 4 hours
Pack size : 1USG,5USG

Surface Preparation & Application

For optimal performance substrates need to be properly prepared as outlined below

Concrete, Plaster, Masonry New & unpainted surface: Ensure surface is clean, dry, and free from all contaminants including Mould, Algae& Fungus by wire brushing followed by flushing with clean water.

Interior: Apply one coat of Britex Alkali Resistant Primer, allow to dry. Apply enough Britex Stucco Putty for obliteration of irregularities. Allow to dry. Smoothen the surface with sand paper & dust off. Apply two coats of Weathershield Matt Emulsion.

Exterior: Apply one coat of Britex Alkali resistant primer or Britex Acrylic primer and allow to dry. Do not use Filler in exterior application. Apply two coats of Weathershield Matt Emulsion

Storage & Handling

Storage & Disposal  : Store under cool & dry condition with adequate ventilation. Dispose in land fill as per guidance of statutory authority Do not empty the cans in drains, sewers, or other water courses.                 Flash point    : Not Applicable                                                                                                                                Shelf life     : 12 months in closed condition

Safety Precautions & First Aid
  • Avoid contact with the skin and eyes. Wear protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream.
  • Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
  • In case of accidental splashes wash the eyes with water & skin with mild soap & water. Never use solvent for cleaning body.
  • In case of inhalation & ingestion expose the person to fresh air & finally consult doctor as quickly as possible.
  • For details on Safety & Handling refer to MSDS.

Disclaimer

The product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of paint & painting system, proper surface, surface preparation & application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product. Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.