Fine Texturefine_texture
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

Fine Texture

Products->Decorative->Exterior

Fine Texture

 

Product

A tough fine texture coating formulated with co-polymer acrylic emulsion, titanium dioxide, coated quartz & alkali resistant extenders. It also contains biocides to control bacteria, fungi & algae in can as well as on dry film. The product can be used for both interior & exterior application on domestic & commercial structure.

Features
  • Can be applied over new & previously painted surface.
  • Less dust collection & easy to wash
  • Good weather resistance
  • Helps covering hair line cracks & other surface imperfections.

Recommended Use

Area of Use               : Exterior & Interior                                                                                                      Substrate                  : Concrete, plaster, masonry, brickwork blockwork, gypsum

Specification & Other Information

Color

:  As per company Shade Card

Finish

:  Matt Texture

NVM%

:  50±2

Thinner/Cleaner

:  Water

Typical DFT

:  150-1000 microns

Theoretical coverage

:  3-4 m2/lt
Application Method :  Roller, Brush or Spray
Practical coverage 

:  Would depend on surface quality, application skill, ossdueto handling etc.
Drying time @ 35°C

:  Touch dry – 2 Hours
Recoating time  :  Minimum - 6 hrs, Maximum -Indefinite
Pack size

:  1USG,5USG
Application Conditio

: Apply this product only if Relative Humidity is less than 90% and substrate temperature is minimum 10°C & above 3°C the dew point. Moisture      content should be 12-20%

Surface Preparation & Application

Concrete, Plaster, Masonry, Brickwork, Blockwork: Ensure surface is clean, dry, and free from all contaminants. Surface must be sound and free from laitance. Remove laitance by wire brush followed by wiping with dry rag.This coating can be applied directly without priming. However, for low porosity surface it is advisable to apply a thin coat of Britex Alkali Resistant Primer or Britex Tex Primer before application of top coat.                                                                                                                                                         For Pre-painted Surfaces: If the surface is chalking or contains loose /friable material, ensure removal of all friable/ loose material by a stiff bristled brush and scraping. Thoroughly dust the entire surface. Apply one coat of Britex Alkali Resistant Primer or Breitx Tex Primer before application of top coat.                       On Timber & MDF surface: Thoroughly clean the surface using coarse sand paper, wipe it clean. Apply a coat of Britex Universal Primer allow it to dry. Do a little de-nibbing (sanding ) & apply top coat.

Storage & Handling

Storage & Disposal             : Store under cool & dry condition with adequate ventilation. Dispose in land fill as per guidance of statutory authority Do not empty the cans in drains, sewers, or other water courses.    Flash point                            : Not Applicable                                                                                                Shelf life                                 : 12 months in closed condition

Safety Precautions & First Aid
  • Avoid contact with the skin and eyes. Wear protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream.
  • Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
  • In case of accidental splashes wash the eyes with water & skin with mild soap & water. Never use solvent for cleaning body.
  • In case of inhalation & ingestion expose the person to fresh air & finally consult doctor as quickly as possible.
  • For details on Safety & Handling refer to MSDS.

Disclaimer

The product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of paint & painting system, proper surface, surface preparation & application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product. Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.