Acrylic Primeracrylic_primer
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

Acrylic Primer

Products->Decorative->Interior

Acrylic Primer

 

Product

Acrylic co-polymer-based primer containing alkali resisting properties. Low particle size emulsion for better penetration into the surface, thus most effectively sealing the surface & improving adhesion of the subsequent coats. The product is compatible with similar products of any origin.

Features
  • Good surface penetration
  • Good opacity.
  • Compatible with all standard emulsion paints
  • Suitable for exterior application

Recommended Use

Area of Use               : Exterior & Interior                                                                                                      Substrate                  : Concrete, plaster, masonry,brickwork,  gypsum

Specification & Other Information

Finish

:  Smooth /Matt

Colour

:  White

NVM%

:  35 ±2

Specific Gravity

:  1.52 ±0.02

Thinner/Cleaner

:  Water

Application Method

:  Brush, Roller andSpray
Recommended DFT :  30microns
Recommended WFT

:  130- 150microns
Theoretical Coverage

:  10-12 m2 /Ltr at 30 micronsDFT
Drying time :  2 -3 Hours @30°C
Pack size :  1USG,5USG

Surface Preparation & System

Concrete, Plaster, Masonry ( New & Unpainted ) Ensure surface is clean, dry, and free from any contamination. Remove laitence by wire brush or sweep blast & wipe clean. Apply one coat of Britex Homeglow Acrylic Primer. Allow to dry & apply required quantity of Stucco putty followed by top coat. For Pre-painted surface, loose particles on the surface must be removed by wired brush or sanding followed by complete dusting. Apply a coat of antifungal solution & allow it to dry. Apply a thin coat of stabilizing primer & allow to dry for application of Homeglow Acrylic Primer & Stucco Putty, followed by top coat, if necessary.

Storage & Handling

Storage & Disposal             : Store under cool & dry condition with adequate ventilation. Dispose in land fill as per guidance of statutory authority Do not empty the cans in drains, sewers, or other water courses.                                                                                                                               Flash point                            : Not Applicable                                                                                             Shelf life                                 : 12 months in closed condition

Safety Precautions & First Aid
  • Avoid contact with the skin and eyes. Wear protective clothing such as overalls, goggles, dust mask and gloves.
  • Ensure that there is adequate ventilation in the area where the product is being applied.

For details on Safety &Handling refer to MSDS.

Disclaimer

The Product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of painting system, proper surface, surface preparation & method of application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.