Product |
|
Two component Acrylic Polyurethane based anti corrosive primer containing Zinc Phosphate as corrosion inhibiting pigment. My PU 990 is an ideal chioce as primer in Automotive Refinish System and High Quality Wood Finish. |
Recommended Use |
|
It is recommended as most versatile PU primer on M.S. surface, concrete, wood, ABS plastic etc in diverse areas of Automobiles, Bus Bodies, OEM components, Electric vehicles, Sheet Metal and engineering wood etc. It has excellent adhesion to various surface and is an ideal primer where fast turnaround of equipment is desired. |
Specification & Other Information |
||||||||||||||||||||
|
Surface Preparation |
|
All surfaces to be coated should be clean, absolutely dry and oil or moisture free before painting application. Oil and grease should be removed by solvent cleaning. ABS Components: Can be applied directly after proper solvent cleaning (preferably by Isopropyl Alcohal) or sanding of ABS surface by emery paper 320/ 400 for proper adhesion. Existing system should be dry and free from loose paint, salt, grease and other contaminants prior to overcoating. New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For sheet metal, phosphating cleaning through 3 or 7 tank process are ideal surface prepration techniques. All damage of earlier coating or contamination from storage and fabrication should be thoroughly cleaned prior to final painting. Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (ISO 8501-1:2007) (minor areas) or by abrasive blasting to min. Sa 2, preferably to Sa 2½ (ISO 8501-1:2007). Improved surface preparation will improve the performance of the product. Wood: To be sanded by power grinding or emery paper to a uniform, sharp, smooth profile corresponding to Rz minimum 50 micron. Any dirt, grease, oil, etc. to be removed before application is commenced. |
Application Data |
||||||||||||
Working Precautions: Material should not be allowed to remain in pipeline, hoses, gun or spray equipment. Thoroughly flush all equipment with Britex PU thinner. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages, the work should recommences with freshly mixed units. Maintenance: Clean all equipment immediately after use with PU thinner. It is good working practice to periodically flush out spray equipment during the course of the working day. All surplus materials and empty containers should be disposed of in accordance with appropriate regional regulations/legislation. |
Drying Characteristics |
|||||||||
|
Compatibility |
|||||
|
Storage |
|
This is solvent based coating and the containers should be kept in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. |
Caution |
|
This product is for professional use only. The paint applicators should be trained, experienced and have the capability and equipment to mix and apply the coatings correctly as instructed. Applicators should use appropriate protection equipment when using this product. This is solvent based product and should be use under well ventilated conditions. Do not inhale spray mist. Skin contact should be avoided. In case of spillage on the skin, it should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water. |
Limitation of Liability |
|
This information is given to the best of our knowledge. Because of the multitude of formulations, production, and application conditions, all the above-mentioned statements have to be adjusted to the circumstances of the processor. Our products are often used under conditions beyond MSPL's control. MSPL cannot guarantee anything but the quality of the product itself. No liabilities can be derived from this fact for individual cases. This issue replaces all previous versions – Printed in India. |