2K Clear Top Coat Premuim 2k_clear_top_coat_premuim_
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

2K Clear Top Coat Premuim

Products->Protective Coatings->PU

2K Clear Top Coat Premuim

 

Product

2K Gloss Clear Premium is a high performance two component variable clearcoat formulated with superior quality Acrylic and Aliphatic isocyanate that gives outstanding gloss, fast drying, good adhesion, hardness, excellent chemical, and weather resistance.

Features
  • Excellent gloss
  • Excellent adhesion and hardness
  • UV Resistance (Non - Yellowing)
  • Scratch Resistance
  • Chemical and Weather Resistance

Recommended Use

Car repair, Industrial coating.

Specification & Other Information 

To be used with 2K Hardner for best performance.

Finish

:  Smooth 

Viscosity

:  70 ± 20 Sec (Ford Cup No:4 @30°C)

Colour

:  Clear and Water white

Specific Gravity

:  1 ± 0.1 kilogram / Litre

DFT

:  50-60 Microns

Mixing ratio

:  Base : Hardener = 2:1 (Volume)
Thinner :  2K Thinner (20-30%)
Method of Application 

:  Conventional spray, Curtain coat, Automatic
Practical coverage

:  Would depend on the surface profile, application skill & method, loss in the             container.
Drying time @ 30°C : Dust Free 30 minutes, Tack free: 3-4 Hours Hard dry over night
Packing

: 1 LTR

Surface Preparation & Application

Conventional & Automatic spray e.g. Spray applicators are most recommended method but can be applied by brush & roller over a small area.                                                                                             Ensure the surface is dry, clean, free from grease & other organic contaminants, well sanded & dusted. Soak the surface with 2K thinner with the help of sponge or rage for 10 minutes.                                      (This is a two-part product. Mix Base Hardener & Thinner (if required) as per ratio mentioned in the can. Mix thoroughly & wait for seven minutes before application for effervescence to subside). Ensure adequate ventilation during mixing, application and drying. Do not apply coating when surface temperature is 30C or more above dew point.                                                                                                                                 May require additional 5-7% thinner depending on ambient temperature & method of application.

Safety Precautions & First Aid
  • Avoid contact with the skin and eyes. Wear suitable protective clothings such as overalls, goggles, dust mask and gloves. Use a barrier cream.
  • Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.
  • This product is flammable. Keep away from sources of ignition. Do not smoke. Take precautionary measures against static discharge. In case of fire, blanket flames with foam, carbon-dioxide or dry chemicals.
  • Eyes & Skin: In the event of accidental splashes, flush eyes with warm water & wash skin with mild soap and seek quick medical advice. Never use solvent for cleaning the affected areas.
  • Inhalation & Ingestion: Remove to fresh air, loosen collar.
  • Don’t induce vomiting.

Disclaimer

The product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of paint & painting system, proper surface preparation & application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product.          Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.