Marine Varnishmarine_varnish
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

Marine Varnish

Products->Wood->Exterior Wood Finishes

Marine Varnish

 

Product

Marine Yacht varnish is a single pack polyurethane alkyd & special phenolic resin based clear coating developed for external & internal application on yacht & other wooden surfaces likely to remain in contact with water. The product enhances the natural look of wood & has good resistance to normal mechanical & chemical, attack in addition-to water & water vapor resistance. It is also resistance to termite & ether microorganism & can With stand moderate temperature.

Features
  • Easy to apply
  • Resistant to micro-organism growth
  • Fully dried film is resistant to various chemicals, water & water vapour
  • Economic and ideal for Yacht & sea going wooden vessels

Recommended Use
  • Natural wood. 
  • Suitable for Interior and Exterior use. Yacht / Boat, wooden floor and items exposed to water & moisture

Specification & Other Information

Finish

:  Smooth

Colour

:  As per company shade card.

NVM %

:  48±2

Gloss

:  Matt . Silk-matt and Glossy

Viscosity

:  80-90 sec B4/30 C

Recommended DFT        

:  40-50microns
Application Method :  Roller, Brush and Conventional Spray
Thinner/ Tool cleaner    

:  Lacquer Thinner
Theoretical Coverage  

:  11-13 m2 / Ltr
Practical coverage :  Would depend on the surface profile, application skill & method loss in the container.
Drying time

:  Surfacedry : 1 HourTack free Dry :5 HoursFullCure :Overnight
Recoating Time

:  Minimum – 5 Hours , Maximum – Infinite
Pack Size

:  1 Litre, 3.5 Litre, 18 Litre

Surface Preparation & Application

For Wooden Surfaces

  • Ensure wood is dry, clean & free from contaminants. Use Vintage Thinner for cleaning the wood surface before sanding.
  • if required Sand the surface with a coarse (P 180) followed by fine sand paper (400) along the direction of the grains.
  • Dust off the surface & apply two coats of Yacht varnish with a gap of 6-8 hrs.
  • If the surface is already painted & the film is strongly adhered on the substrate use Britex Paint Remover before sanding & application of subsequent coats.

A coat of Britex NC filler can be used if grain filling is required

Storage & Handling

Storage & Disposal  : Store in cool, dry condition. & dispose by controlled land fill as per requirement of statutory authority. Don’t empty into drains, sewers or other water courses.

Avoid part use from the Hardener pack & never keep the lid of hardener pack open.

Flash Point           : 27oC

Shelf Life             : Upto 12 months under sealed condition.

Safety Precautions & First Aid
  • Avoid contact with the skin and eye. Wear suitable protective clothing such as Overalls, goggles, dust mask and gloves. Use a barrier cream.
  • Ensure that there is adequate ventilation in the area where the product is being applied.
  • Do not breath vapour or, spray.
  • This product is flammable-Keep away from sources of ignition. Do not smoke. Take carbon-dioxide or dry chemicals.
  • In the event of accidental splashes, flush eyes with warm water & wash skin with mild soap and seek quick medical advice. Never use solvent for cleaning the affected areas.
  • Inhalation & Ingestion: Remove to fresh air loosen collar. Do not induce vomiting.
  • Refer to MSDS for details.

Disclaimer

The product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of paint & painting system, proper surface, surface preparation & application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product.

Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.