Light Weight Body Fillerlight_weight_body_filler
Preloader Close
X

About Us

From the manufacturing of Gum Rosin and Natural Turpentine oil, adding on to various types of Varnishes and coatings of old times.

About Us

Contact Info

maheshwari.hsp@gmail.com, info@maheshwarisyn.com

01882-238688, 238439

Light Weight Body Filler

Products->Protective Coatings->Acrylated

Light Weight Body Filler

 

Product

Light weight filler is a thixotropic two component polyester putty used for filling holes and imperfections.

Features
  • Fast dry
  • Maximum Filling
  • Excellent adhesion
  • Easy sanding

Recommended Use

Car repair, Industrial coating, Bare steel and properly prepared old finishes.

Specification & Other Information 

Finish

:  Smooth 

Viscosity

:  400,000-500,000 cP @ 30°C

Colour

:  Grey and Yellow

Density

:  1.4 ± 0.1 gram/cm3

Mixing ratio

:  Base :Hardener = 100:2

Pot Life

:  3-5 miuntes
Drying time @ 30oC :  Dry Sanding 20 minutes
Sandpaper 

:  P80-P120 followed by P220-P320
Pack size

:  1 kg, 1.5kg, 2kg, 3.5kg, 5kg.

Storage & Handling

Storage & Disposal : Store in cool, dry condition. & dispose by controlled land fill as per requirement of statutory authority. Don’t empty into drains, sewers or other water courses. Never keep the lid of hardener pack open.

Flash Point             : 30oC

Shelf Life               : Up to 6 months under sealed condition.

Safety Precautions & First Aid
  • Avoid contact with the skin and eyes. Wear suitable protective clothings such as overalls, goggles, dust mask and gloves. Use a barrier cream.
  • Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.
  • This product is flammable. Keep away from sources of ignition. Do not smoke. Take precautionary measures against static discharge. In case of fire, blanket flames with foam, carbon-dioxide or dry chemicals.
  • Eyes & Skin: In the event of accidental splashes, flush eyes with warm water & wash skin with mild soap and seek quick medical advice. Never use solvent for cleaning the affected areas.
  • Inhalation & Ingestion: Remove to fresh air, loosen collar. Don’t induce
  • vomiting

Disclaimer

The product information sheet is meant for general information of the product. Optimal performance by the product would be achieved on correct selection of paint & painting system, proper surface preparation & application. The information in this data sheet is provided to the best of our knowledge. However, we have no control over either quality or condition of the substrate and other factors affecting the use and application of this product. Therefore, we cannot accept any liability whatsoever or howsoever arising from the performance of the product or for any loss or damage arising from the use of this product. Product information sheet would be subject to modification as & when product is modified/improved. Our endeavor would be to keep you abreast of change.